User`s manual

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 2016Ti-HTRF.
Installation and maintenance should be performed by experienced technicians
only.
The SuperServer 2016Ti-HTRF is a 2U Twin
2
(two serverboards/nodes in a 2U
chassis) rackmount server based on the SC217HQ-R920B server chassis and four
Super X8SiT-HF serverboards.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8SiT-HF serverboard
and the SC217HQ-R920B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 2016Ti-HTRF
into a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2016Ti-HTRF.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X8SiT-HF serverboard, including the
locations and functions of connectors, headers and jumpers. Refer to this chapter
iii
Preface