User`s manual

5-22
SUPERSERVER 2016Ti-HTRF User's Manual
Universal Serial Bus (USB)
Two Universal Serial Bus ports
(USB0/1) are located on the I/O back-
panel. An additional four USB headers
(USB 2/3 and USB 10/11) are included
to provide front chassis access. USB
4 is a Type A USB port. USB cables
are not included. See the tables on the
right for pin defi nitions.
Back Panel USB Ports,
Type A USB Port Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 +5V 5 +5V
2 USB_PN 6 USB_PN
3 USB_PP 7 USB_PP
4 Ground 8 Ground
Front Panel USB Header
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 +5V 6 +5V
2 USB_PN 7 USB_PN
3 USB_PP 8 USB_PP
4 Ground 9 Ground
5 NA 10 Key
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the
VGA port on the I/O backplane. These
ports accept RJ45 type cables. A dedi-
cated IPMI LAN port is also included
on the rear I/O panel.
Trusted Platform Module Header
This header is used to connect a
Trusted Platform Module (TPM),
available separately from a third-party
vendor. A TPM is a security device
that allows encryption and authentica-
tion of hard drives, disallowing access
if the TPM associated with it is not
installed in the system. See the table
on the right for pin defi nitions.
Trusted Platform Module Header
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2