5015M-UR, 5015M-U, 5015M-NTR, 5015M-NT ServerBoard User's Manual

D-14

UPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

Rebuilding Arrays

Notes: Rebuilding applies to Fault Tolerant arrays (RAID 1) only.

If an array build process is interrupted or when one critical member is missing,

you must perform a Rebuild to restore its functionality. For a critical array rebuild

operation, the optimal drive is the source drive.

If no spare array exists and a hard disk drive fails, you need to create a spare

before you can rebuild an array.

To Rebuild an array

1. From the Main Menu, select Manage Arrays (as shown in the screen below).

From the List of Arrays, select the array you want to Rebuild.

2. Press <Ctrl> and <R> to Rebuild.