5015M-UR, 5015M-U, 5015M-NTR, 5015M-NT ServerBoard User's Manual

7-10

UPERSERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual

USB Function

Select Enabled to activate the USB devices speciﬁ ed. The settings are Enabled

and Disabled.

Legacy USB Support

This setting allows you to enable support for Legacy USB devices. The settings

are Enabled and Disabled.

Advanced Processor Options

Access the submenu to make changes to the following settings.

CPU Speed

This is a display that indicates the speed of the installed processor.

Frequency Ratio (Available when supported by the CPU.)

The feature allows the user to set the internal frequency multiplier for the CPU.

The options are: Default and x12.

Core-Multi-Processing (Available when supported by the CPU.)

Set to Enabled to use a processor's Second Core and beyond. (Please refer to

Intel's web site for more information.) The options are Disabled and Enabled.

Machine Checking (Available when supported by the CPU.)

Set to Enabled to use this function which will allow the CPU to detect and report

hardware (machine) errors via a set of model-speciﬁ c registers (MSRs). The options

are Disabled and Enabled.

Enhanced Intel EIST Support (Available when supported by the CPU.)

Select Enabled to use the Enhanced Intel SpeedStep Technology and allows the

system to automatically adjust processor voltage and core frequency in an effort

to reduce power consumption and heat dissipation. The options are Enabled and

Disabled. Please refer to Intel’s web site for detailed information.

Thermal Management 2 (Available when supported by the CPU.)

Set to Enabled to use Thermal Management 2 (TM2) which will lower the CPU

voltage and frequency when the CPU temperature reaches a predeﬁ ned overheat

threshold. Set to Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking

to be regulated via CPU Internal Clock modulation when the CPU temperature

reaches the overheat threshold.