User`s manual

5-9
Chapter 5: Chassis Setup and Maintenance
5-7 Installing the Air Shroud
Figure 5-10: Installing the Air Shroud in the SC512 Chassis
Installing The Air Shroud
Conrm that the air shroud matches your chassis model.1.
Place the air shroud in the chassis. The shroud sets directly behind the sys-2.
tem fans. If necessary, remove some perforated tabs to ensure a snug t.
Perforated Tabs
The air shroud helps cool the chassis by directing heated air through the rear of
the chassis. When installing the air fan, be aware of the following:
The air shroud is designed to t within the chassis. The sides of the air •
shroud should remain straight in relation to the top. Do not fold or bend the
air shroud.
The air shroud has perforated tabs that can be removed if motherboard com-•
ponents prevent proper air shroud installation. Do not remove a tab unless it
is necessary.
Figure 5-9: Air Shroud Placement
Incorrect Incorrect Correct