User`s manual

SC812L Chassis Manual
4-2
4-3 Installation Step 1: Remove the Chassis Cover
To remove the chassis cover:
1. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time.
2. Once the top cover is released from the locked position, slide the cover toward
the rear of the chassis.
3. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the
server without the cover in place. The chassis cover must be
in place to allow proper airfl ow and prevent overheating.
Figure 4-1: Removing the Chassis Cover
1
2
1
3
Release Tab
!