User`s manual

4-3
Chapter 4: Chassis Setup and Maintenance
4-4 Installation Step 2: Install Hard Drives
To install a hard drive to the chassis:
1. Locate the hard drive bracket.
2. Remove the screw securing the bracket to the chassis and slide the bracket
toward the rear of the chassis.
3. Connect a standard hard drive to the bracket and secure the connection with the
four screws connected to the bracket.
NOTE: The bracket includes four screws and four rubber feet. Always use the
rubber feet with installing the hard drive.
4. Carefully slide replace the bracket in the chassis and secure the hard drive with
the screw that was previously removed.
Figure 4-2: Remove the Hard Drive
Hard Drive Bracket
Figure 4-3: Install the Hard Drive and Bracket