User`s manual
SC846 Chassis Manual
4-4
The drives are mounted in drive trays to simplify their installation and removal from
the chassis. These trays also help promote proper airow for the drive bays.
Figure 4-3: Chassis Drive Tray
Installing a Hard Drive to the Hard Drive Tray
Remove the two screws securing the dummy drive to the drive tray and 1.
remove the dummy drive.Place the hard drive tray on a at surface such as a
desk, table or work bench.
Warning: Except for short periods of time (swapping hard drives),
do not operate the server with the hard drives empty.
Figure 4-4: Removing Dummy Drive from Tray
Drive Tray
Dummy Drive
!
1
1