User`s manual

Chapter 5: Advanced Serverboard Setup
5-11
H8QC8+/H8QCE+ Quick Reference
Jumpers Description Default Setting
J3P 3rd Power Fail Detect Open (Disabled)
JBT1 CMOS Clear See Section 5-10
JP1/JP2 Compact Flash Drive Select Both Closed (Master)
JPA1* SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3* SCSI CH A/B Termination Both Open (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connectors Description
COM1, COM2 COM1/COM2 Serial Port/Header
FAN 1-9 System/CPU Fan Headers
Floppy Floppy Disk Drive Connector
IDE#1/IDE#2 IDE#1/IDE#2 Connectors
J1B1 24-Pin ATX Power Connector
J3 PS/2 Keyboard/Mouse Ports
J16 I
2
C Header for Power Supply
J34 HT Connectors
JA1/JA2* U320 SCSI Channel A/B Connector
JAR 3rd Power Supply Alarm Reset Header
JF1 Front Panel Connector
JF2 Onboard Speaker/Keylock/Power LED
JIPMI IPMI Daughter Card Slot
JL1 Chassis Intrusion Header
JLAN1/2 Gigabit Ethernet (RJ45) Ports
JOH1 Overheat Warning Header
JPW1 Auxiliary 1 Power Connector
JPW2 Auxiliary 2 Power Connector
JSMB System Management Bus Header
JWF1/2 Compact Flash Power Headers
JWOL Wake-On-LAN Header
JWOR Wake-On-Ring Header
nFAN1/4 Additional Fan Headers (nFAN3/4 used with air shroud)
SATA0-3 Serial ATA Ports
Speaker Onboard Speaker (Buzzer)
USB0/1 Universal Serial Bus (USB) Ports 0/1
USB2/3 USB2/3 Headers
*H8QC8+ only