User`s manual

Chapter 5: Advanced Serverboard Setup
5-25
SATA Ports
There are no jumpers to con-
fi gure the SATA ports, which
are designated SATA0-SATA3.
See the table on the right for
pin defi nitions.
SATA Drive Ports
Pin Defi nitions (SATA0-SATA3)
Pin # Defi nition
1 Ground
2TXP
3TXN
4 Ground
5RXN
6RXP
7 Ground
Parallel Port
Connector
The parallel (printer) port is
located on the I/O backplane.
See the table on the right for
pin defi nitions.
Parallel Port Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
1 Strobe- 2 Auto Feed-
3 Data Bit 0 4 Error-
5 Data Bit 1 6 Init-
7 Data Bit 2 8 SLCT IN-
9 Data Bit 3 10 GND
11 Data Bit 4 12 GND
13 Data Bit 5 14 GND
15 Data Bit 6 16 GND
17 Data Bit 7 18 GND
19 ACK 20 GND
21 BUSY 22 Write Data
23 PE 24 Write Gate
25 SLCT 26 NC