User`s manual

5-7
Chapter 5: Integrated Striping
The MANAGE ARRAY window appears.
5. Select ACTIVATE ARRAY in the MANAGE ARRAY window.
A menu window appears.
6. Press Y to activate the array.
The array becomes active after a pause.
Deleting an Array
Follow these steps to delete a selected array:
1. In the ADAPTER LIST window, use the arrow keys to select an SAS adapter.
The ADAPTER PROPERTIES window appears.
2. Use the arrow keys to select RAID PROPERTIES, and then press ENTER.
The SELECT NEW ARRAY TYPE window appears.
3. Select VIEW EXISTING ARRAY.
The VIEW ARRAY window appears. If necessary, press Alt + N to switch to another
array on this adapter.
4. Select M
ANAGE ARRAY.
The MANAGE ARRAY window appears.
5. Select DELETE ARRAY.
A menu window appears.
6. Press Y to delete the array, or press N to cancel the deletion process.
After a pause, the utility deletes the array.
Locating a Disk in a Volume
You can use the SAS2 BIOS Configuration Utility to locate and identify a specific
physical disk drive in a disk enclosure by flashing the drive’s LED. You can also flash the
LEDs of all the disk drives in a RAID volume, if they are in a disk enclosure.
When you add a disk drive to a new mirrored volume, the LED on the disk drive starts
flashing. The LED stops flashing when you finish creating the volume.
WARNING: Before deleting an array, be sure to back up all data on the array that
you want to keep.