User`s manual

9-13
Chapter 9: MegaRAID Window and Menus
5. A dialog box appears warning you about changing your settings.
Press YES to continue.
6. A second confirmation dialog box appears.
Check C
ONFIRM and press the YES button to continue.
The virtual disk properties for your virtual drive are now changed.
9-5 Deleting a Virtual Disk
You can delete virtual disks to rearrange the storage space.
To delete a virtual disk, follow these steps:
1. Back up all user data that is on the virtual disk you intend to delete.
2. In the left panel of the M
EGARAID STORAGE MANAGER window, select the LOGICAL
tab, and click the icon of the virtual disk you want to delete.
3. In the right panel, select the O
PERATIONS tab, and select DELETE VIRTUAL DISK.
4. Click GO.
5. When the warning message appears, click YES to confirm that you want to delete
the virtual disk.
9-6 Controller Configuration Files
Controller configuration files can be saved to a disk for later use. Later, they can be
added, saved or cleared using menu options from the O
PERATIONS J CONFIGURATION
menu.
Saving a Storage Configuration to Disk
You can save an existing controller configuration to a file so you can apply it to another
controller.
To save a configuration file, follow these steps:
1. Select a controller icon from the left panel of the M
EGARAID STORAGE MANAGER
window.
2. On the menu bar, select O
PERATIONS J CONFIGURATION J SAVE CONFIGURATION TO
FILE.
The SAVE dialog box appears.
WARNING: Be sure to back up the data on the virtual disk before you delete it.
Be sure that the operating system is not installed on this virtual disk.