User's and BIOS Manual (1.0)

Chapter 5: Advanced Serverboard Setup
5-11
H8SSP-8/H8SSP-i Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear See Section 5-10
JD1 Onboard Spkr En/Disable Pins 6-7 (Enabled)
JI
2
C1/2 I
2
C to PCI Enable/Disable Closed (Enabled)
JP17 DOC Bus Select Closed (Master)
JPA1* SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3* SCSI Channel A/B Term. Open (Enabled)
JPF Power Force On Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPXAO/JPXBO PCI-X#1/#2 Freq. Select Open (Auto)
JWD1 Watch Dog Pins 1-2 (Reset)
Connectors Description
1U IPMI IPMI 2.0 Slot
COM1/COM2 COM1/2 Serial Port/Header
FAN1/2 - 9/10 Fan Headers
J15 Secondary Power Connector
J22 System Management Bus (IPMB) Header
J43 Primary ATX Power Connector (proprietary)
JA1* Ultra320 SCSI Channel A Connector
JB1* Ultra320 SCSI Channel B Connector
JD1 Power LED/Speaker Header
JF1 Front Panel Headers
JFDD1 Floppy Disk Drive Connector
JIDE#1 IDE#1 Connector
JL1 Chassis Intrusion Header
JLAN1/2 Gigabit Ethernet (RJ45) Ports
JSLED* SCSI LED Activity Header
JSM1 4-Port Serial ATA Connector (SATA0/1/2/3)
JWF1 DOC Power Header
JWOL1 Wake-On-LAN Header
JWOR Wake-On-Ring Header
USB0/1/2/3 Universal Serial Bus Ports (0/1) and Headers (2/3)
VGA Video (Monitor) Port
Onboard LEDs Description
DA1/DA2* SCSI Channel A/B Activity LEDs
DB1-DB8 POST Code LEDs
DP1 +3.3V Standby Power LED
JPB1 UID (Unit Identifi er) LED/Button
*H8SSP-8 only