User`s manual

4-16
C2SBC-Q User's Manual
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port B. The
options are IRQ3 and IRQ4.
COM 3
This setting allows you to decide how the system controls COM 3. The options are
Enabled (user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Base I/O Address
This setting allows you to select the base I/O address for Serial Port C. The options
are 220 and 238.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port C. The
options are IRQ5 and IRQ10.
COM 4
This setting allows you to decide how the system controls COM 4. The options are
Enabled (user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Base I/O Address
This setting allows you to select the base I/O address for Serial Port D. The options
are 220 and 238.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port D. The
options are IRQ5 and IRQ10.
Parallel Port
This setting allows you to decide how the system controls the parallel port. The
options are Enabled (user defi ned), Disabled, and Auto (BIOS or OS-controlled).
Base I/O Address
This setting allows you to select the base I/O address for the parallel port. The
options are 378, 278 and 3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port.
The options are IRQ5 and IRQ7.
Mode
This feature allows you to specify the parallel port mode. The options are Output
Only, Bi-Directional, EPP, and ECP.