User`s manual
Chapter 4: AMI BIOS
4-9
PCI Express Port
This feature can force to enable or disable the onboard PCI Express port.
The options are Disabled, Enabled and Auto.
PEG Force Gen1
This feature forces Gen1 support on the PCI Express Graphics (PEG)
port. The options are Disabled, and Enabled.
Detect Non-Compliant Device
This feature enables or disables the detection of a non-compliant device
that is attached to the PCI Express Graphics (PEG) port. The options are
Disabled, and Enabled.
Initiate Graphics Adapter
This feature selects which graphics controller to use as a boot device. The
options are IGD, PCI/IGD, PCI/PEG, PEG/IGD and PEG/PCI. .
Note: IGD = Integrated Graphics Device.
IGD Memory
This feature selects the amount of memory for the Integrated Graphics
Device (IGD). The options are Disabled, 32M, 64M and 128M.
Render Standby
This feature enables or disables render standly by the Internal Graphics
Device (IGD). The options are Disabled and Enabled.
IGD Multi-Monitor
This feature enables or disables multi-monitor support by the Internal
Graphics Device (IGD). The options are Disabled and Enabled.
Memory Remap
This feature enables or disables the memory above 4GB. The options
are Enabled and Disabled.
South Bridge Conguration
This item displays the current South Bridge conguration.
GbE Controller
Select Enabled to enable the onboard gigabit Ethernet controller. The
settings are Enabled and Disabled.