User`s manual

SC417 Chassis Manual
4-4
The 2.5" drives are mounted in drive carriers to simplify their installation and re-
moval from the chassis. These carriers also help to promote proper airow for the
drive bays.
Figure 4-3: Chassis Drive Carrier
Installing a Hard Drive to the Hard Drive Carrier
Remove the four screws securing the dummy drive to the drive carrier and 1.
remove the dummy drive.
Warning: Except for short periods of time (while swapping hard
drives), do not operate the server with the drives removed from
the chassis drive bays.
Drive Carrier
Dummy Drive
!
Warning! Enterprise level hard disk drives are recommended for
use in Supermicro chassis and servers. For information on recom-
mended HDDs, visit the Supermicro
!