User`s manual

4-5

Chapter 4: Chassis Setup and Maintenance

Place the hard drive into the carrier with the printed circuit board side facing 2.

down.

Carefully align the mounting holes in the drive carrier with the holes in the 3.

hard drive.

Secure the hard drive to the carrier using four screws.4.

Replace the drive tray into the chassis. Make sure to close the drive carrier 5.

handle to lock the drive carrier into place.

Drive Carrier

SAS/SATA

Hard Drive

Figure 4-5: Installing the Hard Drive into the Carrier

Figure 4-6: Installing the Hard Drive