User`s manual

SC417 Chassis Manual
4-6
4-4 Installing Optional Fixed Hard Drives
The SC417 chassis includes brackets for installing either one 3.5" xed hard drive,
or two 2.5" xed hard drives within the chassis. Each chassis can accomodate up
to two internal drive trays supporting up to two 3.5" hard drives or up to four 2.5"
hard drives. The tray part number is MCP-220-84701-0N.
Installing Fixed HDDs into the SC417 Chassis
Disconnect the chassis from any power source. 1.
Remove the chassis cover as described in Section 4-2. 2.
Remove the screw securing the motherboard node tray to the chassis.3.
Slide back the motherboard node tray to reveal the HDD mounting location on 4.
the oor of the chassis.
1
4
1
3
Fixed HDD
Mounting
Location
Figure 4-7: Sliding Back the Motherboard Node Tray