User`s manual

4-7
Chapter 4: Chassis Setup and Maintenance
Installing a 3.5" Single Hard Drive into the Bracket
Align the four round washers and four screws with the holes in the hard drive 1.
and the holes in the bracket.
Secure the hard drive to the bracket using the screws and washers provided.2.
See the instructions below for installing the bracket onto the chassis.3.
Installing Dual 2.5" Hard Drives into the Bracket
Align the eight external tooth washers and eight screws with the holes in the 1.
hard drive and the holes in the bracket.
Secure the hard drive to the bracket using the screws and washers provided.2.
See the instructions below for installing the bracket onto the chassis.3.
Installing the Bracket onto the Chassis
Align the holes in the bracket with the chassis standoffs. 1.
Secure the bracket using the screws provided.2.
Figure 4-8: Installing Single and Dual Hard Drives and the Bracket