Datasheet

7-8
SUPERWORKSTATION 7033A-T Manual


PCI/PnP Configuration
Access the submenu to make changes to the following settings.
Onboard LAN OPROM Configure
Enabling this option provides the ability to boot from LAN. The options
are Enabled and Disabled.
Reset Configuration Data
If set to Yes, this setting clears the Extended System Configuration Data
area. Options are Yes and No.
Frequency for PCIX#1/PCIX#2/SCSI
Use this setting to change the speed of the onboard SCSI and PCIX slots
1 and 2. Options are Auto, 33 MHz, 66 MHz, 100 MHz and 133 MHz.
Frequency for PCIX#4/GLAN
Use this setting to change the speed of the onboard LAN and PCIX slot
4. Options are Auto, 33 MHz, 66 MHz, 100 MHz and 133 MHz.


PCI Device, Slot #1 - Slot#6
Access the submenu for each of the six settings above to make changes
to the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM.
Options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus
master. Options are Enabled and Disabled.