User`s manual

Chapter 4: BIOS

4-15

IP Address Source

This setting sets the IP address source as either Static or DHCP. Selecting

Static allows you to manually set the IP Address, Subnet Mask and Gateway

Address/

 IP Address

Push a number key to modify the parameter and enter the IP Address. The

IP address and current IP address in the BMC are shown.

 Subnet Mask

Push a number key to modify the parameter and enter the Subnet Mask

Address. The subnet address and current subnet address in the BMC are

shown.

 Gateway Address

Push a number key to modify the parameter and enter the Gateway Address.

The Gateway address and current Gateway address in the BMC are shown

 MAC Address

Push a number key to modify the parameter and enter the MAC Address. The

MAC address and current MAC address in the BMC are shown.

BMC Watch Dog Timer Action

This setting is used to set the Watch Dog function. The options are Disabled,

Reset System, Power Down and Power Cycle.

 Event Log Conﬁ guration

View Event Log

Highlight this item and press <Enter> to view the contents of the event log.

Mark All Events as Read

Highlight this item and press <Enter> to mark all events as read.

Clear Event Log

Select Yes and press <Enter> to clear all event logs. The options are Yes and

No to verify.