User`s manual

Chapter 2: Installation
2-13
SATA (I
2
C) Header
The header at JS10 is for SATA I
2
C,
which may be used to monitor the
status of the power supply, fans and
system temperature. See the table on
the right for pin defi nitions.
SATA I
2
C
Pin Defi nitions (JS10)
Pin# Defi nition
1 Data
2 Ground
3 Clock
SMB Header
The System Management Bus header
is located at J22. Connect the appro-
priate cable here to utilize SMB on your
system. See the table on the right for
pin defi nitions.
SMB
Pin Defi nitions (J22)
Pin# Defi nition
1 SMB Data
2 Ground
3 SMB Clock
4 N/A
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach the appropriate cable
to inform you of a chassis intrusion.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
JLAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (desig-
nated JLAN1 and JLAN2) are located
beside the VGA port. These ports
accept RJ45 type cables.