User`s manual

4-14

H8DMU+ User’s Manual

Serial Port2 Address

This option speciﬁ es the base I/O port address and Interrupt Request address

of serial port 2. Select "Disabled" to prevent the serial port from accessing any

system resources. When this option is set to "Disabled", the serial port physi-

cally becomes unavailable. Select "2F8/IRQ3" to allow the serial port to use

2F8 as its I/O port address and IRQ 3 for the interrupt address. The options

are Disabled, 2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.

 DMI Event Logging

View Event Log

Highlight this item and press <Enter> to view the contents of the event log.

Mark All Events as Read

Highlight this item and press <Enter> to mark all events as read.

Clear Event Log

Select Yes and press <Enter> to clear all event logs. The options are Yes and

No to verify.

 Console Redirection

Remote Access

Allows you to Enable or Disable remote access. If enabled, the settings below

will appear.

Serial Port Number

Selects the serial port to use for console redirection. Options are COM1 and

COM2.

Serial Port Mode

Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8,

n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1).

Flow Control

Selects the ﬂ ow control to be used for console redirection. Options are None,

Hardware and Software.