User`s manual

1-6
PDSML-LN1/PDSML-LN2 User’s Manual
Motherboard Features
CPU
• Single Intel Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 4/Celeron
D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 MHz/800
MHz/533 MHz.
• Hyper-Threading (HT), EM64T, Enhanced Intel SpeedStep (EIST) supported
Using the EM64T Feature
• Install a 64-bit OS (Windows XP Professional x64 Ed, Server 2003x64 Ed.)
• Install the 64-bit drivers for all MB components, devices and add-on cards
Using the Hyper-Threading (HT) Technology
• Use a CPU that supports Hyper-Threading Technology
• Install an OS that supports HT, including Windows XP/2003 Server and Linux
2.4x. (Under Linux, use the HT compiler to compile the code. For other operat-
ing systems, be sure to disable the HT feature in the BIOS.)
• Enable the HT feature in the BIOS (under "Advanced" Setting) before install-
ing a supported OS. (*Note: visit www.Intel.com for CPU support and driver
updates.)
OS Licensing Support
• Intel Dual-Core CPU supports: Windows 2000 Professional, Windows Advanced
Server, Windows XP Home, Windows XP Professional, Windows Server 2003
(Standard, Enterprise)
• Intel Dual-Core CPU and Hyper-Threading Technology supports: Windows 2000
Advanced Server, Windows XP Home, Windows XP Professional, Windows
Server 2003 (Standard, Enterprise)
Memory (*
Note: See Section 2-4 for details.)
• Four DIMM slots support single/dual Channel DDRII 667/533/400 MHz up to 8
GB of Unbuffered ECC/Non ECC DDRII SDRAM.
Chipset
• Intel E7230 (Mukilteo)
• Intel ICH7R
Expansion Slots
• Two (2) PCI 32-Bit/33 MHz (PCI1:Slot 4, PCI2: Slot 6)
• Two (2) PCI-Exp. x4 (Slot5)/PCI-Exp. x8 (Slot 6)
BIOS
• 8Mb Firmware Hub Phoenix BIOS
• DMI 2.3, PCI 2.2, ACPI 1.0, Plug and Play (PnP), SMBIOS 2.3, Hardware BIOS
Virus Protection
PC Health Monitoring
• Onboard voltage monitors for CPU core, Chipset Voltage, Memory Voltage,
+3.3V, +5V, +5V Standby, +12V, and −12V