User`s manual
Chapter 1: Introduction
1-5
Jumper Description Default Setting
JBT1 CMOS Clear See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI Slot#1/Slot#2 Speed Pins 2-3 (Disabled)
JPA1 (X7DVA-8)SCSI Controller Enable Pins 1-2 (Enabled)
JPA2, JPA3 SCSI CHA(JPA2),CHB(JPA3)Term.En Off (Enabled) (X7DVA-8)
JPF (JP2) Power Force-On Open (Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/ JPL2 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPWF PWR Supply Failure Detect Off (Disabled)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
ATX PWR (JPW1) Primary 24-Pin ATX PWR Connector
CPU PWR (JPW3) +12V 8-pin PWR
Alarm Reset (JAR) Alarm Reset Header
Chassis Intru.(JL1) Chassis Intrusion Header
COM1/COM2 (JCOM1/2) COM1/COM2 Serial Port Connectors
DIMM#1A-DIMM#2C Memory DDRII Fully Buffered DIMM Slots
FAN 1-6 Fans 1-6: System cooling fans, chassis fans, CPU fans
Floppy (J22) Floppy Disk Drive Connector
FP Control (JF1) Front Control Panel Connector
GLAN 1/2 (JLAN1/2) G-bit Ethernet Ports
IDE1 (JIDE1) IDE1 Hard Drive
JD1 Power LED(pins1-3)/SpeakerHeader (pins 4-7)
JPI
2
C (J17) Power System Management (PWR I
2
C) Header
JPWF Power Supply Failure (See Chapter 2)
Keyboard/Mouse (JKM1) Keyboard/Mouse Connectors
D31 System Status LED (See Chapter 2)
LE2/LE3 (Note6, P.1-4) CPU1 VRM Overheat(LE2)/CPU2 VRM Overheat (LE3)
LE4/LE5 POST LED Indicators (See Chapter 2)
Printer (J21) Parallel Port
SATA0-SATA5 (JS1-JS6) Intel SATA 0-5 Connectors
SIMLP IPMI (J16) IPMI Slot
SGPIO1/2 Serial General Purpose Input/Output Headers for ESB2
SATA
SCSI Chan. A/B (JA1/JA2)SCSI Channel A/Channel B Connectors (X7DVA-8)
Slot#1 (J6) PCI 33MHz Slot
Slot#2(J13)/Slot#3(J12) PCI-X 100MHz (Slot#2)/PCI-X 100MHz ZCR (Slot#3)
Slot#5/Slot#6 PCI-Exp. x4 (Slot#5)/PCI-Exp. x8 (Slot#6)
USB 0/1 (J20) Back Panel USB 0/1
USB 2/3/4/5 (JUSB1/2) Front Panel USB 2/3 (JUSB1)/FPUSB 4/5 (JUSB2)
VGA (J15) VGA Port
WOL (JWOL1) Wake-on-LAN Header
WOR (JWOR) Wake-on-Ring Header
Quick Reference (X7DVA-8/X7DVA-E)