User`s manual

Chapter 4: BIOS
4-7
Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to “wake your system up” from the PME# of PCI slots. The options
are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from the S1, S4 or S5 state. The default
setting is Disabled.
USB Wake Up
Select Enable to allow your system to be “awakened” from the S3 or S4 state with
a USB device. If this feature is set to Enabled, you will also need to enable the
JPUSB1 or JPUSB2 jumper by closing pins 1-2. (Please refer to Pg. 1-5 and Chapter
2 for more details). The default setting is Disabled. Power Loss Control
This setting allows you to choose how the system will react when power
returns after an unexpected loss of power. The options are Stay Off, Power
On, and Last State.
Watch Dog
If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system conguration during bootup.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio (Available when supported by the CPU.)
The feature allows the user to set the internal frequency multiplier for the CPU.
The default setting is Default.
Frequency High Ratio (Available when supported by the CPU.)
The feature allows the user to set high ratio internal frequency multiplier for Intel