User`s manual

4-20
X7SBA User's Manual
tion), 4-pin (server) and 4-pin (workstation). Do not select 4-pin settings if you
have a mix of 3-pin and 4-pin fans.
Voltage Monitoring
The following items will be monitored and displayed:
Vcore A, Vcc 1.5V, -12V, VDIMM, +3.3V, +12V, +5Vsb, +5VDD, P_VTT, Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When rst installed, Supero Doctor III adopts
the temperature threshold settings previously set in the BIOS. Any subsequent
changes to these thresholds must be made within Supero Doctor, since the SD
III settings override the BIOS settings. For the Windows OS to adopt the BIOS
temperature threshold settings, please change the SDIII settings to be the same
as those set in the BIOS.
IPMI (The option is available only when an IPMI card is installed
in the system.)
Firmware Version:
This item displays the current Firmware Version.
System Event Logging
Select Enabled to enable IPMI Event Logging. When this function is set to Disabled,
the system will continue to log events received via system interface. The options
are Enabled and Disabled.
Clear System Event Logging
Enabling this function to force the BIOS to clear the system event logs during the
next cold boot. The options are Enabled and Disabled.