User`s manual

Chapter 2: Installation
2-19
OH/Fan Fail LED
1
NIC1 LED
2
HDD LED
Power LED
Reset
PWR
Vcc
Vcc
Vcc
Vcc
Ground
Ground
19
20
Vcc
X
Ground
NMI
X
Vcc
PWR Fail LED
NIC2 LED
Overheat (OH)/Fan Fail LED
Connect an LED Cable to the OH/
Fan Fail connection on pins 7 and 8
of JF1 to provide advanced warnings
of chassis overheating or fan failure.
Refer to the table on the right for pin
de nitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
de nitions.
OH/Fan Fail LED
Pin De nitions (JF1)
Pin# De nition
7 Vcc
8 Ground
OH/Fan Fail Indicator
Status
State De nition
Off Normal
On Overheat
Flash-
ing
Fan Fail
PWR Fail LED
Pin De nitions (JF1)
Pin# De nition
5 Vcc
6 Ground
A. OH/Fan Fail LED
B. PWR Supply Fail
A
B
X8DT6/E Series Rev. 2.01