User`s manual

4-24
X8DT6/X8DT6-F/X8DTE/X8DTE-F User’s Manual
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. Select Full Access to grant the user
full read and write access to the Setup Utility. Select View Only to grant the user
access to the Setup Utility, but the user is not allowed to change Setup Utility set-
tings. Select Limited to allow the user to change the settings of certain items such
as Date and Time. Select No Access to prevent the user from accessing the Setup
Utility. The options are Full Access, View Only, Limited, and No Access.
Change User Password
Select this feature and press <Enter> to access the submenu, and then enter a
new User Password.
Clear User Password (Available only if User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
Select Setup for the system to check the user's password before the user enter the
Setup Utility. Select Always for the system to check the user's password at system
bootup. The options are Setup and Always.