- SUPER P4SCT SUPER P4SCT+ SUPER P4SCT+II USER'S MANUAL

Chapter 4: BIOS
4-15
4-7 Exit
Choose Exit from the Award BIOS main menu with the Left/Right arrow
keys. You should see the following display:
Save & Exit Setup
When the item "Save & Exit Setup" is highlighted, press <Enter> to save the
changes you've made in the BIOS program (CMOS) and exit. Your system
should, then, continue with the boot-up procedure.
Exit without Saving
When the item "Exit without Saving" is highlighted, press <Enter> to exit the
Setup routine without saving any changes you may have made. Your sys-
tem should then continue with the boot-up procedure.
Third Boot Device
This item allows the user to set the Third boot-up device. The options are
"Removable", "Hard Disks", "CDROM", "Legacy LAN", and "Disabled".
Boot Other Device
If enabled, this option enables the BIOS to load the OS from another device
rather than the ones that have been specified as the first, second and third
boot up devices. The settings are "Enabled" and "Disabled".
Second Boot Device
This item allows the user to set the second boot-up device. The options
are "Removable", "Hard Disks", "CDROM", "Legacy LAN", and "Disabled".