Datasheet

Chapter 4: BIOS
4-3
Main BIOS Setup Menu
Date/Time
Set the system date and time. Key in the correct information in the mm, dd
and yy fields. Press the Enter key to save the data.
Legacy Diskette A
This setting allows the user to set the type of floppy disk drive installed as
diskette A. The options are None, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5
in, 1.44MB, 3.5 in and 2.88MB 3.5 in.
Legacy Diskette B
This setting allows the user to set the type of floppy disk drive installed as
diskette B. The options are None, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5
in, 1.44MB, 3.5 in and 2.88MB 3.5 in.
Swap Floppy Drive
If the system has two floppy drives, enable this feature to assign physical
drive B to logical drive A or physical drive A to logic drive B. The options
are Enabled and Disabled.
!!
!!
! IDE Channel 0 Master/Slave/ IDE Channel 1 Master/Slave/ IDE
Channel 2 Master/Slave / IDE Channel 3 Master/Slave
These settings allow the user to set the parameters of the IDE Channel 0
Master/Slave and IDE Channel 1 Master/Slave slots. Hit <Enter> to activate
the following sub-menu screen for detailed options of these items. Set the
correct configurations accordingly. The items included in the submenu are
listed below: