Datasheet

Chapter 4: BIOS
4-13
Serial Port B
This setting allows you to assign control of serial port B. The options are Enabled
(user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
This setting allows you to set the type of device that will be connected to serial
port B. The options are Normal and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for serial port B. The
options are 3F8, 2F8, 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port B.
The options are IRQ3 and IRQ4.
Parallel Port
This setting allows you to assign control of the Parallel Port. The options are
Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for the Parallel Port.
The options are 378, 278, and 3BC.
Interrupt
This setting allows you to set the Interrupt for the Parallel Port. The options
are IRQ5 and IRQ7.
Mode
This feature allows the user to set the mode for the Parallel Port. The
options are Output Only, Bi-Directional, EPP, and ECP.
DMA Channel
This feature allows the user to select the DMA Channel for the Parallel Port.
The options are DMA1 and DMA3.
Floppy Disk Controller
This setting allows you to assign control of the fl oppy disk controller. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled).
Base I/O Address
This setting allows you to select the base I/O address for the Floppy port. The
options are Primary and Secondary.