User's Manual (1.0a)

SBI-7128R-C6/C6N Blade Module User’s Manual
6-14
Above 4G Decoding
(Available if the
system supports
64-bit PCI decoding)
Select Enabled to decode a 64-bit PCI device in the space above 4G Address.
The options are Enabled and Disabled.
SR-IOV Support
If the system has SR-10V capable PCIe device, this option Enables or Disables
single root I/O virtualization support.
Maximum Payload
Select Auto to allow the system BIOS to automatically set the maximum payload
value for a PCI-E device to enhance system performance. The options are Auto,
128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Maximum Read
Request
Select Auto to allow the system BIOS to automatically set the maximum Read
Request size for a PCI-E device to enhance system performance. The options
are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096
Bytes.
ASPM Support
This feature allows the user to set the Active State Power Management (ASPM)
level for a PCI-E device. Select Force L0 to force all PCI-E links to operate at L0
state. Select Auto to allow the system BIOS to automatically set the ASPM level
for the system. Select Disabled to disable ASPM support. The options are
Disabled, Force L0, and Auto.
Enabling ASPM support may cause some PCI-E devices to fail!
MMIOHBase
This setting must specify a number between 4032 - 4078. Options include 56T,
48T, 24T, 2T, 512G and 256G.
MMIO High Size
This setting allocates MMIOH size per CPU. Options include 256G, 128G, 512G
and 1024G.
CPU1 Slot 1 PCI-E
OPROM
This setting enables or disables the PCIe Slot OPROM option.Options include
Disabled, Legacy or EFI.
Onboard Video
OPROM
Use this setting to control the execution of UEFI and Legacy Video OPROM on
your system. Options include Disabled, Legacy or EFI.
VGA Priority
This setting decides the priority between Onboard and the first Offboard video
device found.
Onboard LAN Option
ROM Type
Select the onboard LAN option ROM type from this setting. Options include
Legacy and EFI.
Onboard LAN 1
OPROM
This setting enables or disables Onbaord LAN 1 Option ROM. Options include
PXE, iSCSI or Disabled.
Onboard LAN 2
OPROM
This setting enables or disables Onbaord LAN 2 Option ROM. Options include
PXE or Disabled.
Network Stack This setting Enables or Disables the UEFI Network Stack.
Table 6-9. PCIe/PCI/PnP Configuration Sub-menu (Continued)
Menu Option Description