User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 System Safety
- Chapter 3 Setup and Installation
- Chapter 4 InfiniBand Modules
- Chapter 5 Ethernet Modules
- 5-1 SBM-GEM-001 Gigabit Ethernet Switch Module
- 5-2 SBM-GEM-X2C(+) 1/10-Gb Ethernet Switch Module
- 5-3 SBM-GEM-X3S+ 1/10-Gb Ethernet Switch Module
- 5-4 SBM-GEM-002 1-Gb Ethernet Pass-through Module
- 5-5 SBM-XEM-002/M 10-Gb Ethernet Pass-through Module
- 5-6 SBM-GEP-T20 1-Gb Ethernet Pass-through Module for Twin-Blade Modules
- 5-7 SBM-XEM-X10SM 10-Gb Ethernet Switch Module
- Chapter 6 1-Gb Ethernet Switch Firmware
- Chapter 7 Layer 2/3 Ethernet Switch Firmware
- 7-1 Overview
- 7-2 Login
- 7-3 Home Page
- 7-4 System Management Page
- 7-5 Layer 2 Management
- 7-6 Layer 3 Management
- 7-7 Multicast
- 7-8 Statistics
- Appendix A HCA Mezzanine Cards
- Appendix B LED Descriptions
- Appendix C Installing Triple Wide Bays
7-205
Chapter 7: Layer 2/3 Ethernet Switch Firmware
VLAN FDB Entries
Clicking the FDB ENTRIES tab brings up the VLAN FDB ENTRIES page (Figure 7-179),
which displays VLAN filter database entries. The parameters for this page are shown in
Table 7-147.
Figure 7-179. VLAN FDB Entries Page
Table 7-147. VLAN FDB Entries Page Parameters
Parameter Description
VLAN ID This parameter specifies the VLAN identifier.
MAC Address This parameter specifies the MAC address learned.
Port This parameter specifies the Index of port where this entry is learned.
Status This parameter specifies the Status of this entry.