User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 System Safety
- Chapter 3 Setup and Installation
- Chapter 4 InfiniBand Modules
- Chapter 5 Ethernet Modules
- 5-1 SBM-GEM-001 Gigabit Ethernet Switch Module
- 5-2 SBM-GEM-X2C(+) 1/10-Gb Ethernet Switch Module
- 5-3 SBM-GEM-X3S+ 1/10-Gb Ethernet Switch Module
- 5-4 SBM-GEM-002 1-Gb Ethernet Pass-through Module
- 5-5 SBM-XEM-002/M 10-Gb Ethernet Pass-through Module
- 5-6 SBM-GEP-T20 1-Gb Ethernet Pass-through Module for Twin-Blade Modules
- 5-7 SBM-XEM-X10SM 10-Gb Ethernet Switch Module
- Chapter 6 1-Gb Ethernet Switch Firmware
- Chapter 7 Layer 2/3 Ethernet Switch Firmware
- 7-1 Overview
- 7-2 Login
- 7-3 Home Page
- 7-4 System Management Page
- 7-5 Layer 2 Management
- 7-6 Layer 3 Management
- 7-7 Multicast
- 7-8 Statistics
- Appendix A HCA Mezzanine Cards
- Appendix B LED Descriptions
- Appendix C Installing Triple Wide Bays
7-247
Chapter 7: Layer 2/3 Ethernet Switch Firmware
DVMRP
The DVMRP link allows you to view DVMRP statistics through the following pages:
• "DVMRP Routers" on page 7-247
• "DVMRP Multicast Routers" on page 7-248
• "DVMRP Prune Statistics" on page 7-249
DVMRP Routers
Clicking the ROUTES tab brings up the DVMRP ROUTES page (Figure 7-211), which
displays DVMRP routes information. The parameters for this page are shown in
Table 7-179.
Figure 7-211. DVMRP Routes Page
Table 7-179. DVMRP Routes Page Parameters
Parameter Description
Network This parameter specifies the network address for this route.
Subnet Mask This parameter specifies the network mask for this route.
Metric This parameter specifies the metric value for this route.
Status This parameter specifies the status of this route.
Neighbor This parameter specifies the neighbor address for this route.
Interface This parameter specifies the interface identifier.