User's Manual (1.0d)

5-13
Chapter 5 Chassis Setup and Maintenance
Checking the Airow
Check the Airow
•Make sure there are no objects to obstruct airow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel's lter is replaced
periodically.
•Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
•Make sure no wires or foreign objects obstruct the airow through the chas-
sis. Pull all excess cabling out of the airow path or use shorter cables.
•The control panel LEDs inform you of system status. See “Chapter 3: System
Interface” for details on the LEDs and the control panel buttons.