User's Manual (1.0d)
5-11
Chapter 5 Chassis Setup and Maintenance
Installing an Expansion Card
1. Conrm that you have the correct riser card for your chassis model and the
add-on card includes a standard bracket.
2. Remove the chassis cover.
3. Install the riser card onto the bracket. Insert the card and bracket into the ap-
propriate slot on the motherboard. Secure the riser bracket to the chassis using
screws as illustrated.
4. Choose the PCI slot in which to place the add-on card.
5. In that slot, open the PCI slot panel lever and slide the PCI slot panel sideways.
6. From inside the chassis, remove the PCI slot panel panel.
7. Slide the add-on card into the riser card and attach the add-on card bracket in
place of the PCI slot panel.
8. Secure the add-on card by closing the I/O panel lever.
9. Connect cables to the add-on card if necessary.
Figure 5-10. Chassis with a Riser Card
UIO Riser Card
WIO Riser Card