User's Manual (1.0a)
4-1
Chapter 4: Chassis Setup and Maintenance
Chapter 4
Chassis Setup and Maintenance
4-1 Overview
This chapter covers the steps required to install components and perform mainte-
nance on the SC213 chassis. The only tool you will need to install components and
perform maintenance is a Phillips screwdriver, and under certain circumstances, a
hex wrench.
In cases where the installation or maintenance procedures differ between the
UIO and low prole chassis models, alternative instructions or illustrations are
provided.
4-2 Installation and General Maintenance
The following sections will provide you with information on installing components
and performing general mainenance on the system.
Installation Topics
Removing the Chassis Cover
Installing Hard Drives
Installing the Motherboard
Installing the Air Shroud
Completing the Installation
General Maintenance Topics
System Fans
Power Supply
Review the warnings and precautions listed in the manual
before setting up or servicing this chassis. These include in-
formation in Chapter 2 System Safety and the warning/precau-
tions listed in the setup instructions.
!