User's Manual (1.0b)

SC216 Chassis Manual
5-6
Figure 5-6. Securing the Rear 2.5" Hard Drive Cage to the Chassis
1
4
1
5
1
3
3. Place the hard drive cage into the chassis. Secure the front of the hard drive
cage to the chassis by fastening one screw inside the opening of the hard
drive cage as illustrated.
4. Secure the top of the hard drive cage to the chassis frame with two screws,
fastened at the upper edge of the hard drive cage above the opening of the
hard drive cage.
5. Secure the back of the hard drive cage to the chassis with one screw as
shown above.
6. Replace the power cords and power up the server.
Caution: Except for short periods of time, such as swapping hard drives, do not oper-
ate the server with the hard drives empty.