User's Manual (1.0b)

SC216 Chassis Manual
5-16
5-8 CheckingtheAirow
Checking the Server's Airow
1. Make sure there are no objects to obstruct airow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel lter is replaced
periodically.
2. Do not operate the server without drives or drive carriers in the drive bays.
Use only recommended server parts.
3. Make sure no wires or foreign objects obstruct airow through the chassis.
Pull all excess cabling out of the airow path or use shorter cables.
The control panel LEDs inform you of system status. See “Chapter 4 System Inter-
face” for details on the LEDs and the control panel buttons.