User's Manual (1.0b)
D-6
SC213 Chassis Manaual
Socket Settings
Socket Socket Setting Note
REMOTE_FAN_FAIL_
SOCKET1
Connected
Front panel fan fail indicator
(optional)
General Jumper Settings
Jumper Jumper Settings Note
PRI_MODE1 1-2 Factory setting do not change
BUZZER_ENB1
Open: Disable
Closed: Enable
Buzzer enable*
Front Panel LEDs
LED State Specication
12V_LED1 OFF
Backplane power failure. Light is on during
normal operation.
5V_LED1 OFF
Backplane power failure. Light is on during
normal operation.
*The buzzer sound indicates that a condition requiring immediate attention has
occurred.
The buzzer alarm is triggered by the following conditions:
1. Hard drive failure
2. Fan failure
3. System temperature over 45º Celsius.