SUPER ® DOUBLE-SIDED STORAGE SC417 CHASSIS SERIES SC417E16-R1400LPB SC417E26-R1400UB SC417E16-R1400UB SC417E26-R1400LPB USER’S MANUAL 1.
SC417 Chassis Manual The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc.
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SC417 chassis. Installation and maintenance should be performed by experienced technicians only. This manual lists compatible parts available when this document was published. Always refer to the our Web site for updates on supported parts and configurations.
SC417 Chassis Manual Manual Organization Chapter 1 Introduction The first chapter provides a summary of the main components included with the SC417 chassis and describes the main features of the chassis. This chapter also includes contact information. Chapter 2 System Safety This chapter lists warnings, precautions, and system safety. It is recommended that you thoroughly familiarize yourself with installing and servicing the chassis and all safety precautions.
Preface Appendix B Power Supply Specifications This chapter lists the specifications of the power supply provided with your chassis. For additional information, refer to the Supermicro website at www.supermicro. com. Appendix C SAS2-216EL Backplane Specifications This section contains detailed specifications on the SAS2-216EL backplane. Additional information can be found on the Supermicro Web site at www.supermicro. com.
SC417 Chassis Manual Table of Contents Chapter 1 Introduction 1-1 Overview.......................................................................................................... 1-1 1-2 Shipping List..................................................................................................... 1-1 1-3 Where to get Replacement Components......................................................... 1-2 1-4 Contacting Supermicro.....................................................................
Preface Chapter 5 Rack Installation 5-1 Overview.......................................................................................................... 5-1 5-2 Unpacking the System..................................................................................... 5-1 5-3 Preparing for Setup.......................................................................................... 5-1 Choosing a Setup Location..............................................................................
SC417 Chassis Manual Notes viii
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SC417 chassis features extremely high storage density with a maximum of seventy-two 2.5" hot-swappable drives per enclosure. The chassis also features high-availability with 1400 Watt Gold Level (1+1) redundant power supplies and seven 8 cm hot-swappable cooling fans. The SC417 series chassis is ideal for DB/ file servers, data warehouses, media stream servers, video on demand, security servers and other applications.
SC417 Chassis Manual 1-3 Where to get Replacement Components Alhough not frequently, you may need replacement parts for your system. To ensure the highest level of professional service and technical support, we strongly recommend purchasing exclusively from our Supermicro Authorized Distributors/ System Integrators/Resellers. A list of Supermicro Authorized Distributors/System Integrators/Resellers can be found at: http://www.supermicro.com. Click the Where to Buy link.
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.
SC417 Chassis Manual 1-5 Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required before any warranty service will be rendered. You can obtain service by calling your vendor for a Returned Merchandise Authorization (RMA) number. When returning to the manufacturer, the RMA number should be prominently displayed on the outside of the shipping carton, and mailed prepaid or hand-carried.
Chapter 2: System Safety Chapter 2 System Safety 2-1 Overview This chapter provides a quick setup to get your chassis up and running. Following the steps in order given should enable you to have your chassis set up and operational within a minimal amount of time. This quick setup assumes that you are an experienced technician, famailiar with common concepts and terminology. 2-2 Warnings and Precautions You should inspect the box the chassis was shipped in and note if it was damaged in any way.
SC417 Chassis Manual 2-4 Electrical Safety Precautions Basic electrical safety precautions should be followed to protect yourself from harm and the SC417 from damage: • • • • • • • • Be aware of the locations of the power on/off switch on the chassis as well as the room’s emergency power-off switch, disconnection switch or electrical outlet. If an electrical accident occurs, you can then quickly remove power from the system. Do not work alone when working with high-voltage components.
Chapter 2: System Safety • Please handle used batteries carefully. Do not damage the battery in any way; a damaged battery may release hazardous materials into the environment. Do not discard a used battery in the garbage or a public landfill. Please comply with the regulations set up by your local hazardous waste management agency to dispose of your used battery properly. 2-5 • • • • • 2-6 General Safety Precautions Keep the area around the chassis clean and free of clutter.
SC417 Chassis Manual • • • • • • Touch a grounded metal object before removing any board from its antistatic bag. Do not let components or PCBs come into contact with your clothing, which may retain a charge even if you are wearing a wrist strap. Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or contacts. When handling chips or modules, avoid touching their pins. Put the serverboard and peripherals back into their antistatic bags when not in use.
Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview There are six LEDs on the front control panel as well as others on the drive carriers to keep you constantly informed of the overall status of the system and over-all health of specific components. SC417 models have two buttons on the chassis control panel: A reset button and a power on/off switch. This chapter explains the meanings of all LED indicators and the appropriate responses you may need to take.
SC417 Chassis Manual 3-2 Control Panel Buttons There are two push-buttons located on the left handle of the chassis. From top to bottom these are a power on/off button and a reset button. Power: The main power button is used to apply or remove power from the power supply to the system. Turning off system power with this button removes the main power but keeps standby power supplied to the system. Therefore, you must unplug system before servicing. Reset: The reset button is used to reboot the system.
Chapter 3: System Interface 1 NIC1: Indicates network activity on GLAN1 when flashing. 2 NIC2: Indicates network activity on GLAN2 when flashing. Overheat/Fan Fail: When this LED flashes, it indicates a fan failure. When continuously on (not flashing) it indicates an overheat condition, which may be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally.
SC417 Chassis Manual 3-4 Drive Carrier LEDs The SC417 chassis uses SAS or SATA drives. SAS/SATA Drives Each SAS/SATA drive carrier has two LEDs. • Blue: Solid on = Drive is present and available. Blinking = Drive is actively being accessed. Each Serial ATA drive carrier has a blue LED. When illuminated in a solid on state, this blue LED (on the front of the SAS/SATA drive carrier) indicates drive activity.
Chapter 4: Chassis Setup and Maintenance Chapter 4 Chassis Setup and Maintenance 4-1 Overview This chapter covers the steps required to install components and perform maintenance on the chassis. The only tool you will need to install components and perform maintenance is a Phillips screwdriver. Print this chapter to use as a reference while setting up your chassis. ! Review the warnings and precautions listed in the manual before setting up or servicing this chassis.
SC417 Chassis Manual 4-2 Removing the Chassis Cover 3 2 12 2 12 Figure 4-1: Removing the Chassis Cover Removing the Chassis Cover 1. Unplug the chassis from any power source 2. Remove the screws securing the cover to the chassis. 3. Lift the cover up and off the chassis. ! Warning: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating.
Chapter 4: Chassis Setup and Maintenance 4-3 Installing Removable Hard Drives 2 1 Figure 4-2: Removing Hard Drive Removing Hard Drive Carriers from the Chassis 1. Press the release button on the drive carrier. This extends the drive carrier handle. 2. Use the handle to pull the drive carrier out of the chassis.
SC417 Chassis Manual Dummy Drive Drive Carrier Figure 4-3: Chassis Drive Carrier The 2.5" drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help to promote proper airflow for the drive bays. ! Warning: Except for short periods of time (while swapping hard drives), do not operate the server with the drives removed from the chassis drive bays.
Chapter 4: Chassis Setup and Maintenance SAS/SATA Hard Drive Drive Carrier 4 Figure 4-5: Installing the Hard Drive into the Carrier 2. Place the hard drive into the carrier with the printed circuit board side facing down. 3. Carefully align the mounting holes in the drive carrier with the holes in the hard drive. 4. Secure the hard drive to the carrier using four screws. 5. Replace the drive tray into the chassis. Make sure to close the drive carrier handle to lock the drive carrier into place.
SC417 Chassis Manual 4-4 Installing Optional Fixed Hard Drives The SC417 chassis includes brackets for installing either one 3.5" fixed hard drive, or two 2.5" fixed hard drives within the chassis. Each chassis can accomodate up to two internal drive trays supporting up to two 3.5" hard drives or up to four 2.5" hard drives. The tray part number is MCP-220-84701-0N. Installing Fixed HDDs into the SC417 Chassis 1. Disconnect the chassis from any power source. 2.
Chapter 4: Chassis Setup and Maintenance Figure 4-8: Installing Single and Dual Hard Drives and the Bracket Installing a 3.5" Single Hard Drive into the Bracket 1. Align the four round washers and four screws with the holes in the hard drive and the holes in the bracket. 2. Secure the hard drive to the bracket using the screws and washers provided. 3. See the instructions below for installing the bracket onto the chassis. Installing Dual 2.5" Hard Drives into the Bracket 1.
Flat head 6-32 x 5 mm [0.197] Pan head 6-32 x 5 mm [0.197] SC417 Chassis Manual DVD-ROM, CD-ROM, and FLOPPY DRIVE 4-5 Installing the Motherboard Permanent and Optional Standoffs Flat head Round head Pan head 6-32 x 5 mm M3 x 5 mm 6-32 x 5 mm [0.197] [0.197] and Standoffs prevent short circuits by [0.197] securing space between the motherboard Round hea M2.6 x 5 m [0.197] the chassis surface. The SC417 chassis includes permanent standoffs in locations RAIL used by most motherboards.
Chapter 4: Chassis Setup and Maintenance 15 Figure 4-9: Motherboard Installation 4. Lay the motherboard on the chassis aligning the permanent and optional standoffs. Compare the mounting holes in the motherboard to those in the chassis. 5. Secure the motherboard to the chassis using the rounded, Phillips head screws. Do not exceed eight pounds of torque per square inch when tightening down the motherboard. 6.
SC417 Chassis Manual PCI Slot Setup SC417: The chassis includes PCI slots for expansion cards. The number of cards used depends on your chassis model. SC417 LP Models: Provides seven low-profile PCI card slots for expansion cards. SC417 UIO Models: Provides four full-height/full-length slots, three low-profile slots and includes a universal expansion card. PCI Card Slots Figure 4-12: SC417 LP model Expansion Slot Setup in LP (Low Profile) Chassis The SC417 chassis includes PCI slots for expansion cards.
Chapter 4: Chassis Setup and Maintenance Expansion Slot Setup in U (Universal Output) Chassis SC417 U model chassis accepts a slightly smaller "L" shaped motherboard to allow for a universal expansion card to be used. This universal output card allows the systems to accept SAS, SCSI, IB, Ethernet, and other types of connections. SC417 U chassis accepts three full-length, full-height expansion cards and the fourth slot is used for the UI/O card.
SC417 Chassis Manual 4-6 Installing the Air Shroud 12 Break-Away Tabs Figure 4-13: Air Shroud for the SC417 Chassis Air shrouds concentrate airflow to maximize fan efficiency. The SC417 chassis air shroud does not require screws for its installation. The SC417 air shroud is designed with removeable break-away tabs that allow the air shroud to be adjusted to fit a variety of motherboards. Installing the Air Shroud 1. Disconnect the chassis from any power source and remove the chassis cover. 2.
Chapter 4: Chassis Setup and Maintenance 4-7 Checking the Server's Air Flow Checking the Air Flow 1. Make sure there are no objects to obstruct airflow in and out of the server. In addition, if you are using a front bezel, make sure that the bezel's filter is replaced periodically. 2. Do not operate the server without drives or drive trays in the drive bays. Use only the recommended server parts. 3. Make sure that no wires or foreign objects obstruct airflow through the chassis.
SC417 Chassis Manual 4-8 System Fans Seven hot-swappable, heavy-duty fans provide cooling for the chassis. These fans circulate air through the chassis thereby lowering the chassis internal temperature. Release Tab Airflow Direction Indicator Figure 4-14: System Fan Replacing a System Fan 1. Open the chassis while the power is running to determine which fan has failed. (Never run the server for an extended period of time with the chassis cover open.) 2.
Chapter 4: Chassis Setup and Maintenance Figure 4-15: Placing the System Fan 4-15
SC417 Chassis Manual 4-9 Power Supply The SC417 chassis has a 1400 Watt high-efficiency redundant power supply. This power supply is auto-switching capable. This enables it to automatically sense and operate at a 100v to 240v input voltage. An amber light will be illuminated on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. Redundant power supplies are hot-swappable, and can be changed without powering down the system.
Chapter 5: Rack Installation Chapter 5 Rack Installation 5-1 Overview This chapter provides instructions for installing the chassis into a rack. Follow the instructions in the order given to ensure that the system is mounted correctly. 5-2 Unpacking the System You should inspect the box which the chassis was shipped in and note if it was damaged in any way. If the chassis itself shows damage, you should file a damage claim with the carrier who delivered it.
SC847 Chassis Manual ! 5-4 • Warning! ! Warnings and Precautions Rack Precautions Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. • In single rack installations, stabilizers should be attached to the rack. • In multiple rack installations, the racks should be coupled together. • • • • • • • Always make sure that the rack is stable before extending a component from the rack.
Chapter 5: Rack Installation • 5-5 Always keep the rack's front door and all panels and components on the servers closed when not servicing to maintain proper cooling. Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the rack environment may be greater than the ambient temperature of the room.
SC847 Chassis Manual 5-6 Rack Mounting Instructions This section provides information on installing the chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean that the assembly procedure will differ slightly from the instructions provided. You should also refer to the installation instructions that came with the rack unit you are using. NOTE: This rail will fit a rack between 26.5" and 36.4" deep.
Chapter 5: Rack Installation Locking Tabs Each inner rail has a locking tab. This tab locks the chassis into place when installed and pushed fully into the rack. These tabs also lock the chassis in place when fully extended from the rack. This prevents the server from coming completely out of the rack when when the chassis is pulled out for servicing. Releasing the Inner Rail Releasing Inner Rail from the Outer Rails 1. Identify the left and right outer rail assemblies as described on page 5-4. 2.
SC847 Chassis Manual Inner Rails 14 2 14 3 Figure 5-3: Installing the Inner Rails Figure 5-4: Inner Rails Installed on the Chassis Installing The Inner Rails on the Chassis Installing the Inner Rails 1. Confirm that the left and right inner rails have been correctly identified. 2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of the chassis with the holes in the inner rail. 3.
Chapter 5: Rack Installation 1 L-min=676.00(26.61")(outer rail) 12 14 21D01 13 Figure 5-5: Extending and Releasing the Outer Rails Installing the Outer Rails on the Rack Installing the Outer Rails 1. Press upward on the locking tab at the rear end of the middle rail. 2. Push the middle rail back into the outer rail. 3. Hang the hooks of the front of the outer rail onto the slots on the front of the rack. If necessary, use screws to secure the outer rails to the rack, as illustrated above. 4.
SC847 Chassis Manual Ball-Bearing Shuttle Figure 5-6: Installing into a Rack Standard Chassis Installation Installing the Chassis into a Rack 1. Confirm that the inner rails are properly installed on the chassis. 2. Confirm that the outer rails are correctly installed on the rack. 3. Pull the middle rail out from the front of the outer rail and make sure that the ball-bearing shuttle is at the front locking position of the middle rail. 4. Align the chassis inner rails with the front of the middle rails.
Chapter 5: Rack Installation Optional Quick Installation Method The following quick installation method may be used to install the chassis onto a rack. Installing the Chassis into a Rack 1. Install the whole rail assembly onto the rack as described on page 5-7. 2. Release the inner rail without retracting the middle rail. 3. Install the inner rails on the chassis as previously described on page 5-6. 4. Install the chassis onto the middle rail as described in the previous section.
SC847 Chassis Manual Adapters for Round and Threaded Hole Racks The SC417 chassis includes adapter brackets for those customers using round hole racks or racks with threaded holes size M5 or larger. Installing the Adapter Bracket 1. Place the hooks of the front of the outer rail into the square holes of one of the adapter brackets. 2. Place the hooks of the rear of the outer rail into the square holes of a second adapter bracket. 3. Adjust the length of the outer rail to fit within the rack uprights. 4.
Appendix A: Chassis Cables Appendix A SC417 Cables and Hardware A-1 Overview This appendix lists supported cables for your chassis system. It only includes the most commonly used components and configurations. For more compatible cables, refer to the manufacturer of the motherboard you are using and our Web site at: www.supermicro.com. A-2 Cables Included with SC417 Chassis (SAS/SATA) SC417 Part # Type Length Description CBL-0088L Cable 9" Seven each, 10.
SC417 Chassis Manual A-3 Compatible Cables These cables are compatible with the SC417 Chassis. Alternate SAS/SATA Cables Some compatible motherboards have different connectors. If your motherboard has only one SAS connector that the SAS/SATA cables must share, use one of the following cables. These cables must be purchased separately. Cable Name: SAS Cable Quantity: 1 Part #: CBL-0175L Alt.
Appendix A: Chassis Cables Extending Power Cables Although Supermicro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. To use these motherboards you may have to extend the power cables to the mother boards. To do this, use the following chart as a guide. Power Cable Extenders Number of Pins Cable Part # Length 24-pin CBL-0042 7.9” (20 cm) 20-pin CBL-0059 7.9” (20 cm) 8-pin CBL-0062 7.
SC417 Chassis Manual A-4 Chassis Screws The accessory box includes all the screws needed to set up your chassis. This section lists and describes the most common screws used. Your chassis may not require all the parts listed. M/B HARD DRIVE Flat head 6-32 x 5 mm [0.197] Pan head 6-32 x 5 mm [0.197] DVD-ROM, CD-ROM, and FLOPPY DRIVE Pan head 6-32 x 5 mm [0.197] Flat head 6-32 x 5 mm [0.197] Round head M3 x 5 mm [0.197] Round head M2.6 x 5 mm [0.197] RAIL Flat head M4 x 4 mm [0.
Appendix B: Power Supply Specifications Appendix B SC417 Power Supply Specifications This appendix lists power supply specifications for your chassis system. SC417 1400W MFR Part # PWS-1K41P-1R AC Input 1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5A 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5A DC Output 4A +5V Standby DC Output 92A @ 100-140V +12V 116Ap @ 180-240V With Distributor: +5V 30A +3.3V 24A -12V 0.
SC417 Chassis Manual Notes B-2
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Appendix C SAS2-216EL1/EL2 Backplane Specifications C-1 Overview of the SAS2-216EL1/EL2 Backplanes The SAS2-216EL1/EL2 model backplanes consists of a SAS2-216EB backplane (A) with one or two SAS2-216EL daughter cards (B and C) mounted on the rear of the backplane. The SAS2-216EL1 model consists of the SAS2-216EB backplane (A) and one SAS2-216EL daughter card (B), mounted on the right-hand side of the backplane.
SC417 Chassis Manual Safety Guidelines To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. C-2 ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic components. To prevent damage to your system, it is important to handle the backplane very carefully. The following measures are generally sufficient to protect your equipment from ESD.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications C-4 An Important Note to Users All images and layouts shown in this user's guide are based upon the latest PCB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual.
SC417 Chassis Manual Connectors, Jumpers and LEDs C-6 Connectors 8 A56 B43 B56 BUZZER1 BPN-SAS2-216EB REV: 1.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications C-7 Front Connector and Pin Definitions 1. Flash Chips The flash chip enhances the backplane memory. 2. Expander Chips This expander chip allows the backplane to support dual ports, cascading, and failover. 3. 5. SAS Ports The primary and secondary sets of SAS ports provide expander features including cascading and failover. From right to left the ports are Primary 1,2,3 and Secondary 1,2,3. 6.
SC417 Chassis Manual C-8 Jumper Locations and Settings REMOTE_FAN_FAIL1 BUZZER_ENB1 REMOTE_FAN_FAIL2 + 4 GND GND +12V REMOTE_FAN_FAIL2 REMOTE_FAN_FAIL1 BUZZER1 1 B56 2 BUZZER_ENB1 +5V A B56 GND GND 1 +12V 4 BPN-SAS2-216EB REV: 1.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications General Jumper Settings Jumper Jumper Settings Note PRI_MODE1 Pins 2-3 Factory setting, do not change PRI_MODE2 Pins 2-3 Factory setting do not change REMOTE_FAN_FAIL1 Open: Enable (Default) Closed: Disable Enables / disables the fan speed reporting.
SC417 Chassis Manual B56 U2 A1 P1 A15 B1 F2 A43 A29 B29 B15 A56 B43 1 C C 5V_LED1 4 FAN2 A C B29 B15 C P2 B1 BPN-SAS2-216EB REV: 1.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS #J0 #J1 #J2 #J3 #J4 #J5 #J6 #J7 #J8 #J9 #J10 #J11 #J12 #J13 #J14 #J15 #J16 #J17 #J18 #J19 #J20 #J21 #J22 #J23 C-9 Front Connectors and LED Indicators MH1 MH4 MH3 MH7 MH6 MH8 MH5 MH2 C65 J6 J8 J7 J10 J13 J12 J14 J19 A C A C FAIL18 ACT18 R40 A FAIL19 7 27 9 33 7 21 21 22 22 J21 J20 9 33 33 8 21 9 8 MH9 22 33 9 33 9 J18 21
SC417 Chassis Manual Front LED Indicators Front LED Hard Drive Activity Failure LED SAS #J0 ACT #0 FAIL #0 SAS #J1 ACT #1 FAIL #1 SAS #J2 ACT #2 FAIL #2 SAS #J3 ACT #3 FAIL #3 SAS #J4 ACT #4 FAIL #4 SAS #J5 ACT #5 FAIL #5 SAS #J6 ACT #6 FAIL #6 SAS #J7 ACT #7 FAIL #7 SAS #J8 ACT #8 FAIL #8 SAS #J9 ACT #9 FAIL #9 SAS #J10 ACT #10 FAIL #10 SAS #J11 ACT #11 FAIL #11 SAS #J12 ACT #12 FAIL #12 SAS #J13 ACT #13 FAIL #13 SAS #J14 ACT #14 FAIL #14 SAS #J15 ACT #15 F
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Dual Port and Cascading Configurations C-10 Single and Dual Port Expanders Single Ports SAS2-216EL1 model backplanes have a single-port expander on the daughter card that accesses all of the drives and supports cascading. Port A Primary Ports Expander 1 C862 15 + 10 C861 DESIGNED IN USA 20 25 1 28 MH2 C858 5 + P_ICE_TDO + + EC1 4 + J3 Rev:1.
SC417 Chassis Manual C-11 Failover The SAS2-216EL2 model backplane has two expanders which enable effective failover and recovery. SAS HBA Y9 J2 BPN-SAS2-216EL U16 A MH2 Rev:1.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications C-12 Failover with RAID Cards and Multiple HBAs The SAS2-216EL backplane may be configured for failover with multiple HBAs using either RAID controllers or HBAs to acheive failover protection. RAID Controllers: If RAID controllers are used, then the failover is accomplished through port failover on the same RAID card.
SC417 Chassis Manual C-13 Chassis Power Card and Support Cables Chassis Power Card In a cascaded configuration, the first chassis includes a motherboard and at least one Host Bus Adapter (HBA). Other servers in this enclosed system must be equipped with a power card. This section describes the supported power card for the SAS2-216EL series backplane. For more information, see the Supermicro Web site at http://www.supermicro. com.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Connecting an Internal HBA to the Backplane The following section lists the most common cables used to connect the HBA to the backplane.
SC417 Chassis Manual Cable Name: iPass (Mini-SAS) to iPass (Mini-SAS) Part #: CBL-0108L-02 Length: 39 cm (15 inches) Part #: CBL-0109L-02 Length: 22 cm (9 inches) Part #: CBL-0110L-02 Length: 18 cm (7 inches) Description: This cable has an iPass (SFF-8087/Mini-SAS) connector (36-pin) at each end. It connects from the HBA to the SAS2-216EL model backplane.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Connecting an External HBA to the Backplane This backplane supports external host bus adapters. In this configuration, the HBA and the backplane are in different physical chassis. This allows a JBOD (Just a Bunch Of Drives) configuration from an existing system. Single External Host Bus Adapter 20 25 28 C MH2 C862 15 + 10 1 C861 DESIGNED IN USA C858 5 + + + P_ICE_TDO EC1 EXPDBG1 + L37 Rev:1.
SC417 Chassis Manual Supported External HBA to Backplane Cable Use the following cable if your external HBA has an InfiniBand connector. Figure C-15: SAS InfiniBand Cable (CBL-0200L) Cable Name: SAS InfiniBand to Mini-SAS X4 1M cable, PBF Part #: CBL-0200L Length: 1 meter Description: This cable has an InfiniBand connector (SFF-8470) on one end and an SFF-8088-1X (26-pin) connector at the other end.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Connecting Multiple Backplanes in a Single Channel Environment This section describes the cables used when cascading from a single HBA. These connections use CBL-0167L internal cables and CBL-0166L external cables.
SC417 Chassis Manual Single HBA Configuration Cables Single Port Cable Assembly Figure C-17: Single Port Internal Cable (CBL-0167L) Cable Name: SAS EL2/EL1 Backplane Cable (Internal) with 2-port Cascading Cable, 68 cm Part #: CBL-0167L (SFF-8087 to SFF-8088 x1) Ports: Single Placement: Internal cable Description: Internal cable. Connects the backplane to the HBA or external port.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Connecting Multiple Backplanes in a Dual Channel Environment This section describes the cables used when cascading from dual HBAs. These connections use CBL-0168L internal cables and CBL-0166L external cables.
SC417 Chassis Manual Dual HBA Configuration Cables Dual Port Cable Assembly Figure C-20: Dual Port Internal Cable (CBL-0168L) Cable Name: SAS Dual-port Cable Assembly, 68/76 cm Part #: CBL-0168L Placement: Internal cable Ports: Dual Description: Internal cascading cable. Connects the backplane to the host bus adapter or external port. Used in dual port environments.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications C-14 Supported Cascading Configurations Cascading allows the system to access data at a faster rate by allowing several backplanes to share resources to reduce latency time. The first backplane in a cascaded system requires a motherboard and an HBA. Other servers require a power control card with no motherboard and no HBA. For more information, specific chassis manuals are available at www.supermicro.com.
SC417 Chassis Manual Server System with Single SAS HBA The expanders allow horizontal branching. This configuration also applies to dual ports.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Dual SAS HBA and Cascaded Configuration A C A 1 1 1 + R159 PRI_MODE2 R161 PRI_MODE1 R158 R157 SMART_UART BCA236 BCA234 3 3 C2926 4 SAN JOSE,CA 95131 PROJECT NAME: TEL:408-503-8000 FAX:408-503-8008 BPN-SAS2-216EL PRI_J2 A PRI_J1 MDIOINTERFACE SUPER TOLERANCES DECIMAL ANGLE X .1 30 XX .03 MACH FINISH XXX.010 1.
SC417 Chassis Manual Dual SAS HBA and Cascaded Configuration with Branching Port B Ex.
Appendix C: SAS2-216EL1/EL2 Backplane Specifications Notes C-27
SC417 Chassis Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
