User's Manual (1.0)

2-10
SUPERSERVER 2028GR-TR/TRT/TRH/TRHT User's Manual
2-7 Checking the Chassis Setup
Checking the Drives
Next, you should check to make sure the hard drives have been properly installed
and all connections have been made. You can add or remove hard drives from the
drive carriers without having to remove the top chassis cover. Refer to Chapter 6.
Checking the Airow
Airow is provided by system fans. The system component layout was carefully
designed to direct sufcient cooling airow to the components that generate the
most heat.
Note that all power and data cables have been routed in such a way that they do
not block the airow generated by the fans.
Providing Power
Provide input power to the system. Plug the power cord from the power supply unit
into a high-quality power strip that offers protection from electrical noise and power
surges. It is recommended that you use an uninterruptible power supply (UPS).
Finish by depressing the power button on the chassis control panel.