User's Manual (1.0)

3-2
SUPERSERVER 2028GR-TR/TRT/TRH/TRHT User's Manual
1
3-2 Control Panel Buttons
The control panel includes two push-buttons.
Reset: The reset button is used to reboot the system.
Power: The main power switch is used to apply or remove power from the power
supply to the server system. Turning off system power with this button removes the
main power but keeps standby power supplied to the system. Therefore, you must
unplug system before servicing.
3-3 Control Panel LEDs
There are six LEDs that provide status information about the system.
NIC2: Indicates network activity on GLAN1 or GLAN2 when ashing
Power: Indicates power is being supplied to the system power supply units. This
LED should normally be illuminated when the system is operating
HDD: Indicates activity on the hard drive when ashing