User's Manual (1.0)
5-12
SUPERSERVER 2028GR-TR/TRT/TRH/TRHT User's Manual
SW1 UID Switch
(BP) USB 4/5 (3.0) Backpanel USB 3.0 Port 4/Port 5
(FP) 2/3 (3.0) Front Accessible USB 3.0 headers 0/1, 2/3
(FP) USB 0/1 (2.0) Front-Accessible USB 2.0 header for two USB connections
USB 0/1
VGA Backpanel VGA port
X10DRG-H(T) LED Indicators
LED Description State Status
LE4 Rear UID LED Blue: On Unit Identied
LE2 Onboard PWR LED On System Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
Notes:
•For JPCIE1-1/JPCIE1-3 PCI slots to work properly, use proprietary riser cards
(eg. RSC-G2B-A66-O-P) in the slots.
•PCI Slot 1, Slot 2 and Slot 5 are controlled by CPU1 and are only available
when a processor is installed in CPU Socket 1. PCI Slot 3, Slot 4 and Slot 6
are controlled by CPU2 and are available only when a processor is installed
in CPU Socket 2.
•To provide adequate power supply to the system, be sure to connect all onboard
power connectors to the power supply.
Caution: To avoid damaging the power supply or the serverboard, be sure to
connect the power supply to the SMCI-proprietary power connector (JPW1), and
six 8-pin power connectors (JPW2, JPW3-7) on the serverboard. Failure in doing
so may void the manufacturer warranty on your power supply and serverboard.