User's Manual (1.0)

Chapter 6: Advanced Chassis Setup
6-13
3. Lift the fan housing up and out of the chassis.
4. Disconnect the fan cable.
5. Examine the drawings below, then disassemble the fan housing by removing
the front and rear fan guards (A).
6. Reassemble the fan housing around the replacement fan as follows:
Front and GPU Fans:
Clip the front and rear fan guards (A) into the left and right side clips (B)
Figure 6-14. Reassembling the Mid Fan Housing
Figure 6-13. Reassembling a Front or GPU Fan Housing
1
A
1
A
1
B
1
A
1
A
1
B
1
B
1
B
1
C
Mid Fans:
Slide the center clip (C) between the two fans. Clip the front and rear fan
guards (A) to the left and right side clips (B)
7. Reconnect the cable to the replacement fan.
8. Replace the chassis cover and power cord, then power the system back on.