User's Manual (1.0)

7-12
SUPERSERVER 6017TR-TQF/TFF/TF User's Manual
QPI Link Frequency Select
Use this feature to select the desired QPI frequency. The options are Auto,
6.4 GT/s, 7.2 GT/s, and 8.0 GT/s.
XDIMM Confi guration
This section displays the following DIMM information.
Current Memory Mode
This item displays the current memory mode.
Current Memory Speed
This item displays the current memory speed.
Mirroring
This item displays if memory mirroring is supported by the serverboard.
Memory mirroring creates a duplicate copy of the data stored in the memory
to enhance data security.
Sparing
This item displays if memory sparing is supported by the serverboard. Memory
sparing enhances system performance.
XDIMM Information
The status of the memory modules detected by the BIOS is displayed.
Memory Mode
When Independent is selected, all DIMMs are available to the operating
system. When Mirroring is selected, the serverboard maintains two identical
copies of all data in memory for data backup. When Lock Step is selected,
the serverboard uses two areas of memory to run the same set of operations
in parallel. The default setting is Independent.
DRAM RAPL Mode
RAPL (Running Average Power Limit) provides mechanisms to enforce power
consumption limits on supported processors The options are DRAM RAPL
MODE0 , DRAM RAPL MODE1, and Disabled.