User's Manual (1.0)

Chapter 7: BIOS

7-27

XNIC Conﬁ guration

Link Speed

Use this feature to change the link speed and duplex for the current port. The

options are AutoNeg, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.

Wake on LAN

Select enabled to wake the system with a magic packet. The options are Enabled

and Disabled.

Blink LEDs

This feature allows the user to specify the duration for LEDs to blink. The range is

from 0 ~ 15 seconds. The default setting is 0.

PORT CONFIGURATION INFORMATION

This section displays the following port information:

• UEFI Driver

• Adapter PBA

• Chip Type

• PCI Device ID

• PCI Bus:Device:Function

• Link Status

• Factory MAC Address

• Alternate MAC Address