User's Manual (1.0)

2-4
SUPERSERVER 6017TR-TQF/TFF/TF User's Manual
2-5 Installing the System into a Rack
This section provides information on installing the SC808 chassis into a rack unit
with the rails provided. There are a variety of rack units on the market, which
may mean the assembly procedure will differ slightly. You should also refer to the
installation instructions that came with the rack unit you are using.
NOTE: This rail will fi t a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fi xed chassis rail that secures
directly to the server chassis and an outer fi xed rack rail that secures directly to
the rack itself (Figure 2-1).
Figure 2-1: Identifying the Sections of the Rack Rails
(Right side rail shown)
Rail Extension
(Inner Rail is preinstalled
to the chassis)
Outer Rails