User's Manual (1.0)

5-16
SUPERSERVER 6017TR-TQF/TFF/TF User's Manual
Notes:
1. For the latest CPU/Memory updates, please refer to our website at http://
www.supermicro.com/products/serverboard/ for details.
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The serverboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
X9DRT-IBQF/IBFF/F Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS See page 5-25
JIB1 Infi niBand Enable/Disable
(X9DRT-IBQF/X9DRT-IBFF only)
Pins 1-2 (Enabled)
JI2C1/
JI2C2
SMB to PCI-E Slots Pins 2-3 (Normal)
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 Ethernet GLAN1/GLAN2 Enable/
Disable
Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description State Status
LE1
Onboard PWR
LED
Green: On Onboard PWR On
LE2 UID LED Blue: On Unit Identifi ed
LEB1/
LEB2
Infi niBand LED On
IB Connected
(X9DRT-IBQF and X9DRT-IBFF
only)